FUJIHD is one of the professional cargo lift manufacturers & suppliers in China.If you are interested in any of our cargo lift or would like to discuss a custom order, please feel free to contact us.
FUJIHD is one of the professional cargo lift manufacturers& suppliers in China.
Cargo elevator height from 1 to 20 meters, and can be customized according to the requirements of special specifications of the lifting ladder. It is mainly used for upper and lower freight transportation of high altitude goods, such as factory assembly line, cargo warehouse, parking lot, wharf, construction, logistics and so on. Lift and lift elevator system is driven by hydraulic pump station, so it is also called hydraulic cargo lift.
2. The flow of cargo elevator
● The cargo elevator can only be operated by one person. It is strictly prohibited to use the cargo lift at the same time in different floors. When the ladder is not used, it must be stopped at the two floor and locked.
● If all vehicles convey goods to the warehouse, if they want to use cargo ladder, they should notify the two floor office staff in advance, using the inter phone to make preparations ahead of schedule and not rush to use.
● When the cargo lift needs to be used, it should be confirmed in strict accordance with the standard inquiry.
1, When the driver enters the warehouse yard, he should use the intercom to notify the staff in the two floor office area. The driver asks for the standard: the cart (car) has arrived at the warehouse and needs to use the cargo ladder. Storehouse standard answer: you can use it (if you can't use it, please tell the driver to wait a little).
2.Get the answer that can be used. The driver should use the rolling door key to open the rolling door and use the intercom to notify the staff in the two floor office area. The driver's standard inquiry is: rolling door has been opened, and the cargo lifts can be lowered. The warehouse standard answer: receive, elevator downlink, please notice (at this time the warehouse staff can operate the elevator down to the first floor).
3.When the elevator down to the floor, warehouse staff should be the first time using the lock switch lock and ladder, with a walkie talkie to inform the driver; warehouse inquiries: can start loading. The driver's standard answer: received.
4., When the goods are loaded as required, the first floor staff must check whether the cargo door is closed, and whether the latch is inserted. When the check is finished, the first floor staff should inform the two floor staff, the cargo ladder can go up.
Standard machine MRL goods lift Technical Data Sheet
Max. travel height
shaft w idth* shaft depth AH *BH (m m )
Sliding two panel
Sliding two panel
Center four panel
Center four panel
Cargo lift mainly used for upper and lower freight transportation of high altitude goods, such as factory assembly line, cargo warehouse, parking lot, wharf, construction, logistics and so on.
5. check before driving
● Will drive the cargo elevator up and down for two times without exception.
● Opens the door into the sedan chair and checks whether the carton is on the floor. There is no obvious change in the accuracy of the flat layer.
● Door is closed, no hand can be opened from the outside of the layer. When the door and door are not completely closed, the cargo elevators can not start normally.
● Matters to be paid attention to when driving
1. sedan box shall not exceed the rated value.
2. is not allowed to carry inflammable and explosive dangerous goods.
3. non cargo personnel are strictly forbidden to take the elevator.
4. strictly prohibit the opening of the door when the cargo lifts is opened according to the repair button. It is not allowed to use the repair button as a signal in general driving.
If you are interested in any of our cargo lift or would like to discuss a custom order, please feel free to contact us.